79 delta88 royale

squidx115

New member
Jan 15, 2022
7
3
alright, so I got this rust bucket from my neighbor after it sat in her garage for 5+years. only the second car I owned and first rebuild. I'll post more pictures as I get further in the build. currently have carb off and rebuilt, hoping i didnt mess it up. in the process of pulling the engine for a rebuild. it's the origional 350 far as I know. seams as tho it's been rebuilt before as the carb was surprisingly clean compaired to what I was seeing in videos.
any tips are greatly appreciated.

on a side not the back windshield is spiderwebbed and I'm having a hard time finding a new one. if you have one near michigan let me know.
 

squidx115

New member
Thread starter
Jan 15, 2022
7
3
20210418_103813.jpg
 

Attachments

  • 20210418_104008.jpg
    20210418_104008.jpg
    1.4 MB · Views: 236
  • 20211004_201127.jpg
    20211004_201127.jpg
    3.6 MB · Views: 225
  • 20210919_105143.jpg
    20210919_105143.jpg
    1.7 MB · Views: 242

94CAPRICECLASSIC

New member
Mar 1, 2022
19
3
Allen Park,MI
Hey another Delta owner!...Nick here from Allen Park,MI...see you got your work cut out for you on that ol'girl...where abouts in Michigan are you?...maybe we could meet up sometime and I could help you with your project and vice versa...mines 98% rust free but I'm searching for parts that I need for the finishing touches!
 

Attachments

  • 20220226_170739.jpg
    20220226_170739.jpg
    8 MB · Views: 219
  • 20220226_171810.jpg
    20220226_171810.jpg
    8 MB · Views: 223
  • 20220226_172044.jpg
    20220226_172044.jpg
    8 MB · Views: 215
  • Like
Reactions: GoodOldsGuy

squidx115

New member
Thread starter
Jan 15, 2022
7
3
Im around lansing area. What parts do you need? Im not going for a stock rebuild so if you need original parts that i can replace with aftermarket we could probably work something out. Im gonna have a screaming metal deathtrap with an unquenchable thirst by the time im done. Lol.
 

94CAPRICECLASSIC

New member
Mar 1, 2022
19
3
Allen Park,MI
Ahh got ya!...I'm in Metro Detroit...I need the metal trim that goes around each wheel well and some restoration pieces for the interior just mainly get it back to looking the part inside and out....I plan on a 455 big block Olds in the future...keeping it mostly stock appearance wise with a full interior...QA1 complete suspension...coilovers...etc...front and rear Wildwood brake system...master cyl. etc...and a bullet proof rear end with all Moser compotents...ilI plan on going on a large car for large car shootout against Dodges lineup in the power barn if you catch my drift.
 

94CAPRICECLASSIC

New member
Mar 1, 2022
19
3
Allen Park,MI
Don't know if you plan on keeping the chrome around the wheel wells but if they aren't dented I'd be willing to buy them off of you but not sure which direction you plan on going with your paint and body on your car.
 

squidx115

New member
Thread starter
Jan 15, 2022
7
3
I could probably do that. Ill take a look at quality of them and let you know. Long as i can get em off clean and metal is decent under them i wont mind sending them your way. I just dont want sharp edges exposed. I know a couple guys in metal fab so i can get them to help me get something rad set up for mine.
 

squidx115

New member
Thread starter
Jan 15, 2022
7
3
Yea. Got bits of rust/wear here and there. Youll probably want some cleaner ones.
 

DeltaElectra88

New member
Oct 6, 2021
16
3
What lift setup do you got on that 4 door?...hey squid...did you get a chance took at that wheel well trim?
It has air shocks in the back, front is the typical replacement spring of modern times, it came that way when I bought it a few years ago, I'm not big on air shocks typically but with the inconsistencies of modern springs, I accept the air shock's extra maintenance and appreciate the adjustability

I have usually run big rubber, but lately have been going toward smaller rubber, the pic with the black steelies is 4 225/70/15, this pic is with 275/60 and 255/60

IMG_0453.JPG
 
  • Like
Reactions: GoodOldsGuy

94CAPRICECLASSIC

New member
Mar 1, 2022
19
3
Allen Park,MI
Ahh ok!...im due for a suspension upgrade since everything is untouched since it left the factory in 78...the car only has 55k original documented miles on it...I've been doing a ton of replacing on the car due to the age.
 

GoodOldsGuy

Member
Oct 20, 2020
75
8
Texas
What lift setup do you got on that 4 door?...hey squid...did you get a chance took at that wheel well trim?
Not trying to muddy the water here, but I have a 1979 Custom Cruiser and I've been toying with the idea of removing the wheel well trim completely. I took them off of my 78 Delta 88 and I liked the look. I'm confident that it's the same trim that came on the 88's and 98's. My car is almost completely rust free and the wheel well trim looks pretty good. They do have a few nicks and scratches but overall they are in very good condition. The car spent most of its life in Oklahoma and I brought it to Texas. I seriously doubt that it was ever driven in snow/ice/salt roads. I did take it out when it snowed here in North Texas last year, but we don't salt the roads in Texas. Well maybe a few overpasses get a brine spray during icey conditions but thats usually limited to big city highways and a few interstate bridges. I drove it on the back roads of Hood county to see how the posi worked in snow and I was pleased. Anyway, I might could be convinced to pull the trim off. I put Keystone Klassics on the car and the wheel wells look a bit busy with all that chrome. No promises, but if you get completely stuck looking for the trim, let me know.
 

94CAPRICECLASSIC

New member
Mar 1, 2022
19
3
Allen Park,MI
Well guys you can't find parking lenses new you can't find new taillights and a lot of stuff is super hard to find so I sold the car but don't worry I'm still in the B body family though!...I am now the proud owner of a near mint condition rust free 1994 Caprice Classic!
 

Attachments

  • Screenshot_20220417-210618_Facebook~2.jpg
    Screenshot_20220417-210618_Facebook~2.jpg
    142.4 KB · Views: 192
  • Screenshot_20220417-210621_Facebook~2.jpg
    Screenshot_20220417-210621_Facebook~2.jpg
    163 KB · Views: 191
  • Like
Reactions: GoodOldsGuy

Jadetrost

New member
Mar 25, 2024
4
1
alright, so I got this rust bucket from my neighbor after it sat in her garage for 5+years. only the second car I owned and first rebuild. I'll post more pictures as I get further in the build. currently have carb off and rebuilt, hoping i didnt mess it up. in the process of pulling the engine for a rebuild. it's the origional 350 far as I know. seams as tho it's been rebuilt before as the carb was surprisingly clean compaired to what I was seeing in videos.
any tips are greatly appreciated.

on a side not the back windshield is spiderwebbed and I'm having a hard time finding a new one. if you have one near michigan let me know.
What a beauty.
 

Latest posts